Tag: surfboard rental kapaa

Whether it is your first time or second rodeo of your surfboard waxing, you might want to read the tips that we are about to share. So, let’s break them down below.

Temperature check

The very first thing to note is the temperature wax to purchase for your surfboard. If you are not sure about the temperature, you could also check with surfboard rental kapaa shop for figuring out the average water temperature for the Kapaa area. Basically, you can find three types of wax products in the market: Cold water wax, warm water wax, and tropical water wax. Different brands and products may have different degrees cap. So, you will want to read the label first before purchasing them.

Apply base coat

The next thing to do is to apply good base coat onto your surfboard. The base coat is made up of harder wax. The sole purpose is to give the base for the later layers of the wax.

Depending on the wax products that you attain from the market, these might have different methods to apply. Make sure to read the manual and do as the instructions say. Applying the base wax to the deck of the surfboard should be done with the vertical strokes only. Then the next layer of the base is done with the horizontal strokes only. In the third base layer, you will want to apply the base wax with diagonal strokes only. Last, you’d apply the base wax on circular strokes.

Apply top coat

After the base wax, you will want to apply the top coat. Applying the top coat is basically the same as you apply the base coat. When done correctly, you will have great quality of wax bumps on your board!

Choosing the wax

If you notice that the outside air temperature becomes hotter, you could upgrade the current wax to warmer wax. This will prevent your wax from melting during commutes. But you won’t necessarily change your wax if you are surfing in the same area for some times. Do not leave your board in the hot sun or hot car since it will make your wax layers melting.

Removing old surf wax

To remove your old surf wax, set your board under the sun exposure for few minutes to soften the wax. Use the scraper to get rid of old wax as much as you can. If necessary, you could purchase citrus based wax remover to ease the process.

Surfing is lovable for many people. It is one of the most fantastic sports that is evergreen and fun when you do it all the time. Once the summer kicks, you will want to go on vacation. Surfboards, sun, and sand. These are the perfect elements to enjoy your holiday. When you go to your destination, you will want to get the right surfboard for your activity. Typically, the shop owner will offer you between the epoxy surfboards and fiberglass surfboards. If you have no idea, see the differences below.

Fiberglass is the kind of weight cloth. The core component of this board is poly or polyester resin. It is also considered as the traditional surfboard. Meanwhile, the epoxy is the hard kind of adhesive. As the name suggests, the surfboard comes with the epoxy material or the EPS. EPS is the abbreviation of expanded polystyrene. Although it is not traditional, it is the lightweight beaded foam.

Many people tend to have the epoxy surfboards and fulfill the necessary for the budget conscious users. It is due to the belief that many people are not used to operating the traditional boards. But it is not a big deal. You can’t go wrong to rent both epoxy and traditional board.

Epoxy boards have a lighter core from its polystyrene foam. Epoxy boards are much lighter than the traditional fiberglass boards. In term of density, epoxy boards are significantly lighter. Users who use epoxy boards claimed that they paddled less intensely than the traditional surfing boards.

For a reason mentioned above, it is natural that average users will use epoxy boards. But don’t get it wrong. Traditional boards also have the positive points that the epoxy boards don’t have. The fiberglass surfboard is responsive than the epoxy ones. They have extra flexibility that epoxy boards don’t have. If you are planning to challenge the choppier water, the conventional or fiberglass surfboard can provide you a smoother ride.

Both fiberglass and epoxy boards have their features. Oth also has its downsides and upsides. It is difficult to decide which one is better. So, the most sensible thing to think is your need. You need to choose the board which is suitable for your needs and preferences.

The internet can be the best place to find rental shops out there. But why waste your time? Visit our surfboard rental kapaa now and find your best surfboards.

Removing the wax from your surfboard shouldn’t be hard. Chances are you apply the wax to surfboard that you rent from the surfboard rental kapaa and want to send it back as it used to be.  If you don’t know how you will need to read this article until the finish.

First things first, you will need to prepare all of the items to help you removing the wax effectively. The good thing here is that you can find all of these from the nearby convenience stores in your town. Make sure to prepare these before proceeding:

1. Wax Comb
2. Hairdryer
3. Glass Cleaner
4. Microfiber cloth

After applying the wax to your surfboard, chances are you use your board for some times. Over time, the wax might not be performing so well. You will notice it from the grotesque appearance. Sometimes, you will feel that your surfboard is more slippery than before. In some cases, the smell of your surfboard is not appealing at all. If you notice sort of signs, it is a great time to scrap all the waxes off and start applying a new one.  

Before doing anything else, make sure that you won’t remove your surfboard wax on the beach. The conventional wax products come with toxic ingredients which will not be an excellent idea for the environment. If you are using eco-friendly wax, it does not mean that the wax is the part of the beach environment. And don’t remove your wax over your rug or carpet since you won’t be able to clean it from their surface. Surf wax sticks, so, the best workstation for you is on the concrete or floor.

To begin, you will want to make the wax softer first. You could either put it under the sun exposure or warm it up with your hair dryer. The thinner the wax is, the more comfortable you are stripping it off your board. Here is where your wax comb enters to help. You can get wax comb in any store, and it is cheap. Don’t use metal thing like brush or knife since it will ruin your board’s surface.

The procedure is quite simple and easy to understand. If you attach the fins in your board, consider to get them off first before proceeding. Beneath your surfboard, slip the big towel or cloth to prevent the wax from dripping directly to the floor. It is important not to place the board straight on the ground. This can be damaging the glassing as well as the fins when you put the pressure on the surfboard. Scrap all the wax until it leaves no traces. Wax remover is also available in convenient stores. You might want to check on the best products out there.

Are you fond of applying surfboard wax on every surf occasion? Do you want to know how to make one yourself? By making the surfboard wax using the natural ingredients, you can save a lot of money for your surfing routine. The knowledge addition will make you more avid surfer in the long run.  

When it comes to DIY surfboard wax, there are many recipes to make the surf wax. The significant fact here is that you can make it from the ingredients that you can find in almost just any department store in your town.

The modern wax products mostly use the chemicals, and the recipes are nearly impossible to make. The commercial wax products come from the ingredients that you can hardly find in the market. But when it comes to the home-based projects, you surely don’t need to make it closer to the commercial products. Much better, you can produce the surfboard wax by yourself by using the organic-based ingredients.

It won’t hurt at all to make organic wax, and it works just as good as the commercial products you can find in the market. There are two ingredients to prepare to make natural surfboard wax.: beeswax and coconut oil. As we know, there are two types of surfboard wax that we can find on the market: warm water wax, and cold water wax. The formula is as simple as these:

Warm water wax = 4 parts of beeswax + 1 part of coconut oil

Cold water wax = 4 parts of beeswax + 1 part of coconut oil + 1 part of tree resin

Now, let’s proceed to work on the recipe.

Method:

You will need two pots. One is more prominent, the other one is smaller. You will need to fill the bigger one with water, and the smaller one placed inside the big. You will put your ingredients in the smaller pot. You will also need a wooden spoon to stir and mix the ingredients.

The method is as simple as this. Melt all the ingredients in the smaller pot and stir them all with the wooden spoon constantly. Set the flame to medium low to prevent the burning. When all liquified and mixed, you can then pour them into ice cubes or another medium to mold. Wait for the mixture to cool or harden up. And that’s it! Your surfboard wax is ready to use! There are many other recipes that you can try. But this simple one is more than enough to apply to your surfboard.

Get your surfboard now from surfboard rental kapaa.